20 Gauge Button Punch Flanger
The Lockformer 20 Gauge Snaplock Flanger is a stand-alone machine used to turn a right-angle flange on radius fittings. The flange height is adjustable, from ¼” to 3/8”, depending on the requirements of the job. In addition, a separate assembly punches the male snaplock into the flange. With use, it is common to replace a series of parts in the forming portion of the flanger including the knurl roll, plain roll, inner race assembly, etc. Please review the parts list to find the replacement parts you need.
Machine Parts Finder
Search For Machine
Search By Part Number
20 Gauge Button Punch Flanger
-
L-60005 1/4-20 x 3/4 HHCS
$1.97 -
L-60048 5/16 - 18 x 1-1/4 HHCS
$1.97 -
L-60098 3/8-16 x 2 HHCS
$1.97 -
L-60402 3/8-16 x 1 SHCS
$1.97
-
L-60576 10-24 x 1/2 RHMS
$1.97 -
L-60611 1/4 x 20 x 3/8 SSS
$1.97 -
L-60680 3/8-16 x 3/8 SSS
$1.97 -
L-60712 7/16- 20 x 3/8 SSS
$1.97
-
L-60761 5/16-18 x 3/4 SHSS
$1.97 -
L-60875 - 3/8-16 x 1 Carriage Bolt
$1.97 -
L-60953 - 3/8-16 x 1 FH SCS
$1.97 -
L-60983 3/8-16 x 1 STS - Thumb Head Screw
$2.33
-
L-61061 1/4-20 HN - Hex Nut
$1.97 -
L-61101 5/16-18 HN - Hex Nut
$1.97 -
L-61120 - 3/8-16 HN - Hex Nut
$1.97 -
L-61352 1/2-20 Hex Nut Special
$1.97
-
L-62026 052 Plate Spacer Washer
$1.96 -
L-62029 3/8 x 1/16 Flat Washer
$1.97 -
L-62103 7/8 x .025 Washer
$1.97 -
L-62370 1/4 Lock Washer
$1.97
-
L-62401 Woodruff Key #9
$1.97 -
L-62404 Woodruff Key #61
$1.97 -
L-62440 Special Machine Key - Concave
$30.41 -
L-62631 Dowel Pin 3/8 x 3/4
$1.97
20 Gauge Button Punch Flanger
Minimal Price:
$1.96