16-18 Gauge Auto-Guide Flanger
The Lockformer 16-18 “Auto Guide” Flanger is a stand-alone machine used to turn a right-angle flange on radius fittings. The flange height is adjustable, from ¼” to 3/8”, depending on the requirements of the job. With use, it is common to replace a series of parts in the forming portion of the flanger, including the knurl roll, plain roll, inner race assembly, etc. Please review the parts list to find the replacement parts you need. However, note that some older models have an "Old Style" Flanger Assembly and require certain parts not shown on the 16-18 Gauge Auto-Guide Flanging Attachment parts list. If this is the case, please contact us for assistance.
Machine Parts Finder
Search For Machine
Search By Part Number
16-18 Gauge Auto-Guide Flanger
-
L-60761 5/16-18 x 3/4 SHSS
$1.97 -
L-60797 4-1/4 Drive Screw
$1.97 -
L-60875 - 3/8-16 x 1 Carriage Bolt
$1.97 -
L-60953 - 3/8-16 x 1 FH SCS
$1.97
-
L-61101 5/16-18 HN - Hex Nut
$1.97 -
L-61120 - 3/8-16 HN - Hex Nut
$1.97 -
L-61351 1/2-20 Stop Nut
$1.97 -
L-61353 5/8-18 Stop Nut
$1.97
-
L-62010 - 5/16 x 1/16 Flat Washer
$1.97 -
L-62029 3/8 x 1/16 Flat Washer
$1.97 -
L-62103 7/8 x .025 Washer
$1.97 -
L-62362 5/16 Lock Washer
$1.97
-
L-62363 3/8 Lock Washer
$1.97 -
L-62370 1/4 Lock Washer
$1.97 -
L-62401 Woodruff Key #9
$1.97 -
L-62404 Woodruff Key #61
$1.97
-
L-62440 Special Machine Key - Concave
$30.41 -
L-62619 Dowel Pin 1/4 x 1
$1.97 -
L-62633 Dowel Pin 3/8 x 1
$1.97 -
L-62650 Dowel Pin 1/2 x 1
$1.97
-
L-65240 7/8 Freeze Plug
$2.64 -
L-65601 Oil Seal (16/18 Ga. A.G. Flanger)
$10.82 -
L-65602 Gasket
$20.57 -
L-66000 B-88 Bearing (Torr.)
$12.07
16-18 Gauge Auto-Guide Flanger
Minimal Price:
$1.97